Engine Oil Filter AM125424 for John Deere Lawn Tractors, Zero-Turn Mowers & Utility Vehicles
AM125424 oil filter for John Deere lawn tractors, zero-turn mowers, and utility vehicles. OEM cross-reference verified. Orders from IXIN Filter.
Description
This AM125424 oil filter is a spin-on engine oil filter engineered as a direct replacement for the John Deere AM125424, one of the most widely used oil filters across John Deere’s lawn and garden, zero-turn mower, and utility vehicle lineup. It’s designed to remove contaminants from engine oil, protecting small-engine components from wear caused by dirt and particulate buildup.
Product Overview
The AM125424 oil filter uses pleated filter media designed to capture fine particulate contamination while maintaining consistent oil flow, supporting engine components like large inlet passages and a rubber seal designed to prevent internal leakage. As noted in general guidance on oil filter change intervals for lawn and commercial mowing equipment, most oil filters in this category should be replaced every 50-100 hours of operation, or with every oil change, depending on the specific engine manufacturer’s recommendation. It’s built with a spin-on design for straightforward installation during routine maintenance. Each unit is dimensionally verified against OEM measurements and tested for filtration performance before shipment — not just matched by part number.
Fits the Following John Deere Models
| Category | Common Models |
|---|---|
| Lawn Tractors | D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, LA105-LA175, LT133-LT170, LX173-LX288 |
| Zero-Turn Mowers | Z225-Z375R, Z425-Z955M, X300-X580 series |
| Compact Utility Tractors / Mowers | X300, X304, X310, X320, X350 |
| Commercial Mowers | 636M, 648M, 648R, 652B, 652E, 652M, 652R, 661R, WG32A-WG48A, WH36A-WH61A, WHP36A-WHP61A |
| Utility Vehicles | F620, F680, F687, M653, M655, M665, GS30, G15 |
This is a widely applicable part number spanning dozens of John Deere models across several decades of production. This table shows the most commonly requested models — a complete fitment list is available on request. Always confirm your specific machine’s model and serial number against the OEM cross-reference before ordering, especially for bulk purchases.
OEM Cross-Reference Numbers
| Brand | Number |
|---|---|
| John Deere | AM125424, AM125424C, AM39687, AM119567, LG4153, LG492932S |
| Kawasaki | GY20577, 49065-0721, 49065-7007 |
| Briggs & Stratton | 696854 |
| Excofilter Cross-Reference | LX12024 |
Key Features
- Pleated filter media, designed to capture fine particulate contamination while maintaining consistent oil flow
- Rubber gasket seal, designed to prevent internal leakage
- Spin-on design for straightforward installation during routine maintenance
- Dimensionally verified against OEM specifications, not just cross-reference number matching
- Consistent batch quality control, with raw material and pre-shipment testing on every production run
- Extremely broad application coverage, spanning John Deere’s lawn tractor, zero-turn mower, commercial mower, and utility vehicle lineup
Specifications (Publicly Referenced Dimensions)
Dimensions below are compiled from publicly available cross-reference and retailer data. Please verify against your machine’s actual filter housing before bulk ordering.
| Spec | Detail |
|---|---|
| Thread | 3/4″-16 |
| Outer Diameter | 77 mm (3-1/32 in) |
| Height | 59 mm (2-5/16 in) |
| O-Ring Outer Diameter | 72 mm (2-13/16 in) |
| O-Ring Inner Diameter | 62 mm (2-7/16 in) |
| Filtration Rating | Approximately 28 microns |
| Pressure Relief Valve Range | 8-14 PSI |
| Filter Type | Spin-on engine oil filter |
| Application | John Deere lawn and garden, zero-turn mower, and utility vehicle lineup |
| Packaging Options | Standard retail box, bulk carton, or private-label packaging available |
Why Source This Oil Filter from IXIN Filter
We manufacture this AM125424 oil filter in our own production facility, with quality control checkpoints from raw material inspection through final pre-shipment testing. If you’re sourcing for a distribution business, lawn and garden equipment dealer, or parts retailer, we can provide:
- Sample units for independent testing before a bulk order
- Documentation on OEM cross-reference verification
- Flexible MOQ and private-label packaging options
- Consistent batch-to-batch quality for repeat orders
Frequently Asked Questions
What John Deere equipment uses the AM125424 oil filter? It’s used across a very wide range of John Deere equipment, including lawn tractors (D100-D170, LA105-LA175, LX173-LX288), zero-turn mowers (Z225-Z955M), compact utility tractors (X300-X580 series), commercial mowers, and utility vehicles like the F620 and F680.
Is the AM125424 the same as the AM125424C? Yes, these are closely related and commonly cross-referenced together for the same oil filter specification. Confirm the exact number matching your equipment’s parts documentation before bulk ordering.
What’s the filtration rating on this filter? It’s commonly rated at approximately 28 microns, designed to capture fine particulate contamination while maintaining adequate oil flow for small-engine applications.
Do you offer samples before a bulk order? Yes. We recommend requesting a sample for independent testing before committing to a bulk order, especially for first-time buyers.
Ready to order or request a sample? Contact IXIN Filter for pricing, MOQ, and lead time on the AM125424 oil filter.
