HF6777 Synthetic Spin-On Hydraulic Filter for Precision Systems
HF6777 synthetic spin-on hydraulic filter for New Holland & industrial equipment. 5 micron at Beta 200. Cross reference BT8307-MPG, P167162. Direct.
Description
The HF6777 hydraulic filter is a synthetic-media spin-on hydraulic filter manufactured by Cummins Filtration (Fleetguard), designed to protect precision hydraulic systems in New Holland agricultural equipment and related industrial applications. It captures fine contaminants from circulating hydraulic fluid, helping prevent unplanned downtime caused by hydraulic component wear. IXIN Filter manufactures this filter to OEM-equivalent specifications, giving distributors and dealers a reliable, factory-direct alternative for scheduled hydraulic filter replacement.
As an IATF 16949-certified filter manufacturer, IXIN supplies the HF6777 hydraulic filter to distributors and service centers in 60+ countries, with consistent batch quality and full traceability for bulk and OEM orders.
Product Specifications
| Attribute | Detail |
|---|---|
| Product Type | Synthetic Spin-On Hydraulic Filter |
| Overall Height | 170.41 mm (6.709 in) |
| Largest/Seam Outer Diameter | 128.93 mm (5.076 in) |
| Thread Size | 1 1/2-16 UN-2B |
| Media Type | Synthetic |
| Particle Size at Beta 200 | 5 microns |
| Standpipe | No |
| Certification | IATF 16949 |
Compatible Equipment
- New Holland Agriculture equipment (precision hydraulic systems)
- Also cross-referenced for industrial hydraulic applications including air refiners, Manitou telehandlers, and various hydraulic power units
Note: Confirm your specific equipment model and hydraulic system configuration against the OE part number before ordering.
HF6777 Cross Reference / OE Replacement Numbers
The HF6777 hydraulic filter is a direct cross reference and replacement for the following OE and aftermarket part numbers:
| Brand / Source | Part Number |
|---|---|
| Fleetguard/Cummins Filtration | HF6777 |
| Baldwin | BT8307-MPG / BT9371-MPG |
| Donaldson | P167162 |
| FRAM | F4E-050-HC-B / P7252 |
| Purolator | 9327082 |
| WIX | 51746 |
| Hydac | MFE160-05BN/2 |
Note: The HF6777 is documented as an upgraded version of the earlier Fleetguard HF6710 hydraulic filter. Confirm with your parts manual which version your equipment requires.
Why Choose IXIN’s HF6777 Hydraulic Filter
- Synthetic Media Performance — Uses synthetic filtration media rated at 5 microns (Beta 200), providing precise protection for sensitive hydraulic components.
- Purpose-Built for Precision Hydraulic Systems — Engineered to protect the tight tolerances of modern precision hydraulic systems, helping prevent unplanned downtime from contamination-related wear.
- OEM-Equivalent Fit — Manufactured to match the OE 1 1/2-16 UN-2B thread specification and dimensions for the HF6777, ensuring drop-in compatibility.
- Factory-Direct Supply — As a manufacturer (not a trading company), IXIN offers stable lead times and customization options for private label, packaging and media specification.
- Bulk & OEM Pricing — Volume discounts available for distributors and equipment dealers. For guidance on verifying cross reference numbers before a bulk order, see our fuel filter cross reference guide — the same verification principles apply across hydraulic, air and fuel filter categories.
Installation & Maintenance Notes
For equipment using the HF6777 hydraulic filter, general service steps include:
- Ensure the hydraulic system is depressurized and the equipment is on level ground before servicing.
- Position a drain container under the filter housing, as some residual hydraulic fluid will be released during removal.
- Remove the old filter element and inspect the housing for metal particles or excessive contamination.
- Install the new HF6777 filter, tightening per manufacturer torque specification for the 1 1/2-16 UN-2B thread — avoid over-tightening, which can damage the gasket seal.
- Check hydraulic fluid level and top up as needed per OEM specification before returning the equipment to service.
- Follow your specific equipment’s recommended service interval.
FAQ
Q: What does “5 micron at Beta 200” mean for the HF6777? A: This rating comes from standardized multi-pass testing and indicates the filter captures a very high percentage of particles at 5 microns and larger, providing precise protection for sensitive hydraulic components like pumps and valves.
Q: Is the HF6777 the same as the HF6710? A: The HF6777 is documented as an upgraded version of the earlier HF6710 hydraulic filter. Confirm with your parts manual which version is correct for your equipment.
Q: What’s the difference between IXIN’s HF6777 and the OEM Fleetguard filter? A: IXIN manufactures this filter to match the OE thread specification, dimensions and synthetic media performance. The main difference is price and lead time — IXIN offers factory-direct pricing for bulk and OEM orders without compromising fit or performance.
Q: Can I order the HF6777 with custom packaging or private label? A: Yes. IXIN supports customized packaging, labeling and media specifications for distributors and private-label buyers. Contact our sales team with your requirements.
Q: What is the minimum order quantity (MOQ)? A: MOQ varies by customization level. Get in touch with us via WhatsApp or email for current MOQ and lead time on the HF6777 hydraulic filter.
