LF3344 Spin-On Lube Filter for Case IH & New Holland Agriculture Equipment
LF3344 spin-on lube filter for Case IH and New Holland Agriculture equipment. 60 LPM flow rate, high burst pressure. Cross reference Baldwin B134.
Description
The LF3344 lube filter is a spin-on full-flow engine oil filter cartridge for Case IH and New Holland Agriculture equipment, engineered to support the high flow rates required by modern engines and extend oil change intervals. IXIN Filter manufactures this filter to OEM-equivalent specifications, giving distributors and dealers a reliable, factory-direct alternative for scheduled oil filter replacement.
As an IATF 16949-certified filter manufacturer, IXIN supplies the LF3344 lube filter to distributors and service centers in 60+ countries, with consistent batch quality and full traceability for bulk and OEM orders.
Product Specifications
| Attribute | Detail |
|---|---|
| Product Type | Spin-On Full-Flow Lube Oil Filter Cartridge |
| Thread Size | 1-1/2″-16 UN-2B |
| Overall Length | 5.16 in (131.1 mm) |
| Largest Outer Diameter | 4.24 in (107.7 mm) |
| Gasket Outer Diameter | 3.95 in (100.3 mm) |
| Gasket Inside Diameter | 3.59 in (91.2 mm) |
| Pressure Valve | No |
| Hydrostatic Burst Minimum | 203.0 psi |
| Rated Flow | 60 LPM |
| Certification | IATF 16949 |
Compatible Equipment
- Case IH agricultural equipment
- New Holland Agriculture equipment
Note: Confirm your specific equipment model and engine configuration against the OE part number before ordering.
LF3344 Cross Reference / OE Replacement Numbers
The LF3344 lube filter is a direct cross reference and replacement for the following OE and aftermarket part numbers:
| Brand / Source | Part Number |
|---|---|
| Fleetguard/Cummins Filtration | LF3344 |
| Baldwin | B134 |
Note: Public cross reference data for this specific part number beyond the Baldwin equivalent is limited. If your factory has verified additional cross reference numbers (Donaldson, WIX, NAPA, etc.), they should be added here.
Why Choose IXIN’s LF3344 Lube Filter
- High Flow Rate Support — Rated at 60 LPM, designed to support the high flow rates required by modern high-output engines.
- Strong Burst Pressure Rating — Rated at a minimum hydrostatic burst pressure of 203.0 psi, providing a solid safety margin under oil system pressure.
- Extended Service Life Design — Engineered for extended oil change intervals, reducing service frequency for fleet and dealer customers.
- OEM-Equivalent Fit — Manufactured to match the OE 1-1/2″-16 UN-2B thread specification and dimensions for the LF3344, ensuring drop-in compatibility.
- Factory-Direct Supply — As a manufacturer (not a trading company), IXIN offers stable lead times and customization options for private label, packaging and media specification. For guidance on verifying cross reference numbers before a bulk order, see our fuel filter cross reference guide — the same verification principles apply to lube filters.
Installation & Maintenance Notes
For Case IH and New Holland Agriculture equipment using the LF3344 oil filter, general service steps include:
- Drain engine oil per OEM procedure before removing the old filter.
- Lightly oil the new gasket with clean engine oil before installation to ensure a proper seal.
- Hand-tighten per manufacturer torque specification for the 1-1/2″-16 UN-2B thread — avoid over-tightening, which can damage the gasket seal.
- Refill with the correct engine oil grade and quantity per OEM specification, then check for leaks after startup.
- Follow your specific equipment’s recommended oil change interval.
FAQ
Q: Is the LF3344 compatible with all Case IH and New Holland equipment? A: The LF3344 is designed for Case IH and New Holland Agriculture equipment sharing this filter specification. Confirm your specific equipment model and engine configuration against the OE part number before ordering.
Q: What’s the difference between IXIN’s LF3344 and the OEM Fleetguard filter? A: IXIN manufactures this filter to match the OE thread specification, dimensions and the documented flow rate/burst pressure performance. The main difference is price and lead time — IXIN offers factory-direct pricing for bulk and OEM orders without compromising fit or filtration performance.
Q: Can I order the LF3344 with custom packaging or private label? A: Yes. IXIN supports customized packaging, labeling and media specifications for distributors and private-label buyers. Contact our sales team with your requirements.
Q: What is the minimum order quantity (MOQ)? A: MOQ varies by customization level. Get in touch with us via WhatsApp or email for current MOQ and lead time on the LF3344 lube filter.
