WF2096 Coolant Filter, Spin-On Replacement for Fleetguard WF2096
WF2096 coolant filter, spin-on replacement with M16 x 1.5 thread. Cross reference Baldwin BW5141, Donaldson P552096, WIX 24196. Factory-direct.
Description
The WF2096 coolant filter is a spin-on engine coolant filter for heavy-duty diesel engines, widely cross-referenced to Volvo, Mack and other truck applications. IXIN Filter manufactures this WF2096 coolant filter as a factory-direct replacement for the Fleetguard WF2096, giving distributors, fleets and repair shops a dependable option for scheduled cooling system maintenance.
IXIN has produced filters since 2010 and supplies customers in more than 60 countries. Browse our full range of coolant filters for trucks, buses, construction and agricultural machinery.
WF2096 Coolant Filter Specifications
| Attribute | Detail |
|---|---|
| Product Type | Spin-On Coolant Filter |
| Outside Diameter | 93 mm (3.66 in) |
| Thread Size | M16 x 1.5-6H (internal) |
| Replaces | Fleetguard WF2096 |
Overall height and gasket details are available on request. Please send us your drawing or sample for confirmation before ordering in bulk.
WF2096 Cross Reference / Replacement Numbers
The WF2096 coolant filter is a cross reference to the following part numbers:
| Brand / Source | Part Number |
|---|---|
| Fleetguard | WF2096 |
| Donaldson | P552096 |
| Baldwin | BW5141 / BW5142 |
| WIX | 24196 |
| NAPA | 4196 |
| Carquest | 89196 |
| Fram | PR9592 |
| Luber-finer | LFW5141 |
| HiFi | WE2096 |
| Volvo | 1661964 |
| Mack | 20539991 |
OE and aftermarket part numbers are listed for reference only. All brand names belong to their respective owners, and IXIN is not affiliated with them. Always confirm fit against your engine before ordering.
Why a Coolant Filter Matters
Engine coolant picks up rust, scale and other particles as it circulates. A coolant filter removes these contaminants and helps protect the water pump, radiator and cylinder liners from wear. Regular replacement supports stable engine temperature and longer cooling system life, especially on trucks that run long hours.
Why Choose IXIN’s WF2096 Coolant Filter
- Factory-Direct Supply: IXIN manufactures filters in its own factory in Linxi County, Hebei. You deal with the manufacturer, not a trading company.
- Wide Cross-Brand Coverage: One WF2096 coolant filter replaces many brand numbers, which helps distributors simplify inventory.
- Spin-On Design: The self-contained spin-on body is replaced as one unit, so service is quick and clean.
- Customization Available: We support customization of filter paper quality, metal thickness and packaging for your market.
- Fast Delivery: In-stock items usually ship in 5 to 10 days. Made-to-order items take 15 to 45 days, depending on quantity.
If you are comparing suppliers, read our guide on how to choose an OEM truck filter factory.
Application Notes
Before ordering the WF2096 coolant filter, check these points:
- Compare the number on your existing filter with the cross reference table above.
- Confirm the thread is M16 x 1.5 and matches your filter head.
- Measure the outside diameter and height of the old filter, and check the gasket size.
- Check your engine manual for the correct coolant filter specification.
If you are not sure about fit, send us the OE number or a photo of the old filter, and we will help you confirm.
Installation and Maintenance Notes
- Switch off the engine and let the cooling system cool down fully. Never open a hot cooling system.
- If the filter head has a shutoff valve, close it before removing the old filter.
- Place a drain pan under the filter, and remove the old filter with a filter wrench.
- Check that the old gasket came off with the filter. A leftover gasket can cause leaks.
- Clean the mounting surface, and lightly oil the gasket of the new WF2096 coolant filter.
- Spin the new filter on by hand until the gasket touches, then tighten as specified by the engine manufacturer.
- Open the shutoff valve, top up the coolant, start the engine, and check for leaks.
- Replace the filter at the interval recommended by the engine maker.
FAQ
Q: Which part numbers does the WF2096 coolant filter replace?
A: It is a cross reference to Fleetguard WF2096, Donaldson P552096, Baldwin BW5141, WIX 24196, NAPA 4196 and others listed above. Confirm dimensions before bulk orders.
Q: What thread does the WF2096 coolant filter use?
A: The listed thread is M16 x 1.5-6H (internal). Make sure your filter head matches before ordering.
Q: Which engines does the WF2096 coolant filter fit?
A: Fit depends on your engine and filter head. Send us your OE number, engine model or a photo of the old filter, and we will help confirm compatibility.
Q: Can I order with custom packaging or private label?
A: We support customized packaging, filter paper quality and metal thickness. Contact our sales team with your requirements.
Q: What are the MOQ and lead time?
A: In-stock goods generally ship in 5 to 10 days, and made-to-order items take 15 to 45 days. Get in touch with us for MOQ on the WF2096 coolant filter.
Need the WF2096 coolant filter or other heavy-duty coolant filters? Send us the OE number, and we will reply with specifications and a quotation.
Email: sales@ixinfilters.com | WhatsApp: +86 18833443345 | Get a quote
