500-0483 Engine Oil Filter for Caterpillar Excavators, Motor Graders & Wheel Dozers
500-0483 (5000483) engine oil filter for Caterpillar 336, 340, 345GC, 349, 352 excavators, 12M3/140M3 graders, 824K/834K dozers. Factory direct pricing.
Description
The 500-0483 oil filter (part number 5000483) is a standard efficiency engine oil filter used across a broad range of Caterpillar equipment powered by the C9.3 and C9.3B engines — including excavators, motor graders, wheel dozers, wheel loaders and cold planers. It protects the engine by capturing contaminants from circulating oil, helping extend the service life of critical internal components. IXIN Filter manufactures the 500-0483 to OEM-equivalent specifications, giving fleets and dealers a reliable, factory-direct alternative for scheduled oil filter replacement.
As a TS16949-certified filter manufacturer, IXIN supplies the 500-0483 oil filter to distributors, equipment dealers and service centers in 60+ countries, with consistent batch quality and full traceability for bulk and OEM orders.
Product Specifications
| Attribute | Detail |
|---|---|
| Product Type | Engine Oil Filter (Standard Efficiency) |
| Outer Diameter | approx. 147 mm |
| Inner Diameter | approx. 34 mm |
| Height | approx. 285 mm |
| Frame Material | Plastic |
| Media Material | Fiber-based high-efficiency filter paper |
| Compatible Engine | Cat C9.3, C9.3B |
| Certification | TS16949 |
Compatible Caterpillar Equipment
- Cat 336, 340, 345GC, 349, 352 Excavators
- Cat 12M3, 140M3 Motor Graders
- Cat 824K, 834K Wheel Dozers
- Also commonly cross-referenced for a broader Cat equipment family sharing the C9.3/C9.3B engine, including 825K/826K/836K compactors, PM620–PM825 cold planers, 966–988K wheel loaders and D8T track-type tractors — confirm your specific model before ordering
Note: Confirm your machine’s exact model, serial number range and production year against the OE part number before ordering, as Cat equipment sharing the C9.3/C9.3B engine platform can vary in filter housing across sub-models.
500-0483 Cross Reference / OE Replacement Numbers
The 500-0483 oil filter is a direct cross reference and replacement for the following OE and aftermarket part numbers:
| Brand / Source | Part Number |
|---|---|
| Caterpillar OE | 500-0483 / 5000483 |
| Caterpillar OE (alt.) | CA5000483 |
Note: Only Caterpillar’s own OE numbering was confirmed with reliable public sources for this specific filter. If you have verified aftermarket brand cross references (Baldwin, Donaldson, Fleetguard, etc.) from your factory records, they can be added here.
Why Choose IXIN’s 500-0483 Oil Filter
- Broad Equipment Coverage — Fits a wide range of Cat excavators, motor graders and wheel dozers powered by the C9.3/C9.3B engine, useful for dealers and fleets standardizing oil filter inventory across mixed equipment.
- Reliable Contaminant Protection — Fiber-based filter media captures particulates from circulating engine oil, helping protect bearings, pistons and other critical components from abrasive wear.
- OEM-Equivalent Fit — Manufactured to match OE dimensions for the 500-0483, supporting drop-in compatibility across the compatible Cat equipment range.
- Factory-Direct Supply — As a manufacturer (not a trading company), IXIN offers stable lead times and customization options for private label, packaging and media specification.
- Bulk & OEM Pricing — Volume discounts available for equipment dealers, distributors and fleet operators. For guidance on verifying cross reference numbers before a bulk order, see our fuel filter cross reference guide — the same verification principles apply across oil, air and fuel filter categories.
Installation & Maintenance Notes
For Cat equipment using the 500-0483 engine oil filter, general service steps include:
- Drain engine oil per OEM procedure before removing the old filter.
- Remove the old filter element and inspect for metal particles or excessive contamination, which may indicate a developing engine issue.
- Lightly oil the new gasket with clean engine oil before installation to ensure a proper seal.
- Install the new 500-0483 filter, tightening per manufacturer torque specification — avoid over-tightening, which can damage the gasket seal.
- Refill with the correct engine oil grade and quantity, then check for leaks after startup.
- Follow your specific Cat model’s recommended oil change interval — always confirm against your machine’s maintenance schedule and duty cycle.
FAQ
Q: Is the 500-0483 an oil filter or a fuel filter? A: Based on Caterpillar’s own parts classification and multiple independent aftermarket sources, the 500-0483 is an engine oil filter. If you’ve seen this number referenced in a fuel filter context elsewhere, we recommend confirming with your supplier or Caterpillar’s parts catalog to avoid a mismatch, as part numbers can occasionally be associated with different products across different catalogs or regions.
Q: Is the 500-0483 compatible with all the listed Caterpillar equipment? A: The 500-0483 is used across a broad range of Cat excavators, motor graders and wheel dozers powered by the C9.3/C9.3B engine. Because this filter spans many equipment categories and years, always confirm your machine’s exact model and serial number range against the OE part number before ordering.
Q: What’s the difference between IXIN’s 500-0483 and the OEM Caterpillar filter? A: IXIN manufactures the 500-0483 to match OEM dimensions and filtration performance. The main difference is price and lead time — IXIN offers factory-direct pricing for bulk and OEM orders without compromising fit or filtration efficiency.
Q: Can I order the 500-0483 with custom packaging or private label? A: Yes. IXIN supports customized packaging, labeling and media specifications for distributors and private-label buyers. Contact our sales team with your requirements.
Q: What is the minimum order quantity (MOQ)? A: MOQ varies by customization level. Get in touch with us via WhatsApp or email for current MOQ and lead time on the 500-0483 oil filter.
