FS20132 Fuel/Water Separator for Volvo & Mack EPA17 Engines
FS20132 spin-on fuel/water separator by Cummins Filtration for Volvo D11/D13 & Mack MP7/MP8 EPA17 engines. Supersedes FS19966. Factory direct pricing.
Description
The FS20132 fuel water separator is a spin-on fuel/water separator manufactured by Cummins Filtration (Fleetguard brand) for Volvo D11, D13 and Mack MP7, MP8 engines meeting EPA17 emissions standards (2017 and newer). Cummins Filtration is the OEM filtration supplier for Volvo and Mack, so while this filter carries the Fleetguard/Cummins name, it’s specifically engineered for the Volvo/Mack engine platform — not for Cummins-branded engines. IXIN Filter manufactures this filter to OEM-equivalent specifications, giving fleets and dealers a reliable, factory-direct alternative for scheduled fuel filter replacement.
As a TS16949-certified filter manufacturer, IXIN supplies the FS20132 fuel water separator to distributors, fleet operators and service centers in 60+ countries, with consistent batch quality and full traceability for bulk and OEM orders.
Product Specifications
| Attribute | Detail |
|---|---|
| Product Type | Spin-On Fuel/Water Separator |
| Overall Height | approx. 131 mm (5.16 in) |
| Maximum Outer Diameter | approx. 110.5 mm (4.35 in) |
| Gasket Outer Diameter | approx. 104.4 mm (4.11 in) |
| Thread | 14 threads per inch |
| Certification | TS16949 |
Compatible Engines
- Volvo D11 Engine (2017+, EPA17)
- Volvo D13 Engine (2017+, EPA17)
- Mack MP7 Engine (2017+, EPA17)
- Mack MP8 Engine (2017+, EPA17)
⚠️ Note: This filter is for 2017-and-newer EPA17-compliant engines. For 2008–2016 Volvo D11/D13 and Mack MP7/MP8 applications, the correct filter is Fleetguard FS19966, not FS20132. Verify your engine’s emissions certification and model year before ordering.
FS20132 Cross Reference / OE Replacement Numbers
The FS20132 fuel water separator is a direct cross reference and replacement for the following OE and aftermarket part numbers:
| Brand / Source | Part Number |
|---|---|
| Fleetguard/Cummins Filtration | FS20132 |
| Fleetguard (predecessor, 2008-2016 models) | FS19966 |
| Fleetguard (superseded) | FS19920 |
| Volvo OE | 21764964 |
| Donaldson (superseded) | P954895 |
Why Choose IXIN’s FS20132 Fuel Water Separator
- Purpose-Built for Modern Volvo/Mack Engines — Engineered specifically for the EPA17-compliant Volvo D11/D13 and Mack MP7/MP8 platform, rather than a generic cross-brand filter.
- Reliable Water Separation — Protects the high-pressure common-rail injection system from water contamination and particulate matter before fuel reaches sensitive injection components.
- OEM-Equivalent Fit — Manufactured to match OE dimensions for the FS20132, supporting drop-in compatibility for Volvo and Mack applications.
- Factory-Direct Supply — As a manufacturer (not a trading company), IXIN offers stable lead times and customization options for private label, packaging and media specification.
- Bulk & OEM Pricing — Volume discounts available for fleet operators, distributors and workshops. For guidance on verifying cross reference numbers and correct model-year fitment before a bulk order, see our fuel filter cross reference guide.
Installation & Maintenance Notes
For Volvo D11/D13 and Mack MP7/MP8 EPA17 engines using the FS20132 filter, general service steps include:
- Drain any accumulated water from the separator before removing the old filter.
- Relieve fuel system pressure before removing the filter element.
- Lightly oil the new gasket with clean diesel fuel before installation to ensure a proper seal.
- Hand-tighten per manufacturer torque specification — avoid over-tightening, which can damage the gasket seal.
- Prime the fuel system per OEM procedure before restarting the engine.
- Follow your specific engine’s recommended service interval — always confirm against your Volvo/Mack maintenance schedule and duty cycle.
FAQ
Q: Does the FS20132 fit Cummins-branded engines like the ISX or X15? A: No. While the FS20132 is manufactured by Cummins Filtration (the Fleetguard brand), it’s specifically designed for Volvo D11/D13 and Mack MP7/MP8 engines — not Cummins-branded engine platforms. Cummins Filtration is the OEM filtration supplier for Volvo and Mack, which is why the filter carries the Fleetguard name despite fitting a different engine brand.
Q: What’s the difference between FS20132 and FS19966? A: FS20132 is for 2017-and-newer EPA17-compliant Volvo D11/D13 and Mack MP7/MP8 engines. FS19966 is the correct filter for the earlier 2008-2016 model years of the same engine platform. Confirm your engine’s emissions certification before ordering.
Q: What’s the difference between IXIN’s FS20132 and the OEM Fleetguard filter? A: IXIN manufactures this filter to match OEM dimensions and filtration/water-separation performance. The main difference is price and lead time — IXIN offers factory-direct pricing for bulk and OEM orders without compromising fit or performance.
Q: Can I order the FS20132 with custom packaging or private label? A: Yes. IXIN supports customized packaging, labeling and media specifications for distributors and private-label buyers. Contact our sales team with your requirements.
Q: What is the minimum order quantity (MOQ)? A: MOQ varies by customization level. Get in touch with us via WhatsApp or email for current MOQ and lead time on the FS20132 fuel water separator.
