WF2122 Water Coolant Filter for Cummins Engines, 11/16-16 UN Spin-On, No Additive, Replaces Cummins 3098689

Description

The WF2122 coolant filter is a spin-on engine coolant filter with an 11/16-16 UN-2B thread and no chemical additive, widely cross-referenced to Cummins engines. IXIN Filter manufactures this WF2122 coolant filter as a factory-direct replacement for the Fleetguard WF2122 and Cummins 3098689, giving distributors, fleets and repair shops a dependable option for scheduled cooling system maintenance.

IXIN has produced filters since 2010 and supplies customers in more than 60 countries. Browse our full range of coolant filters for trucks, buses, construction and agricultural machinery.

WF2122 Coolant Filter Specifications

Please confirm dimensions against your sample or drawing before ordering in bulk.

Compatible Applications

Cross-reference data lists the WF2122 coolant filter for:

• Cummins engines
• Caterpillar engines
• Also listed in some data for Cummins ISX12 and ISM11 and PACCAR MX-11 and MX-13 engines

Fit depends on the engine and filter head. Please confirm your engine, model year and the OE number of your existing filter before ordering.

WF2122 Cross Reference / Replacement Numbers

The WF2122 coolant filter is a cross reference to the following part numbers:

OE and aftermarket part numbers are listed for reference only. All brand names belong to their respective owners, and IXIN is not affiliated with them. Always confirm fit against your engine before ordering.

Why a Coolant Filter Matters

Engine coolant picks up rust, scale and other particles as it circulates. A coolant filter removes these contaminants and helps protect the water pump, radiator and cylinder liners from wear. Regular replacement supports stable engine temperature and longer cooling system life, especially on trucks and equipment that run long hours.

Why Choose IXIN’s WF2122 Coolant Filter

• Factory-Direct Supply: IXIN manufactures filters in its own factory in Linxi County, Hebei. You deal with the manufacturer, not a trading company.
• Wide Cross-Brand Coverage: One WF2122 coolant filter replaces Fleetguard, Cummins, Baldwin, Donaldson and WIX references, which helps distributors simplify inventory.
• Spin-On Design: The self-contained spin-on body is replaced as one unit, so service is quick and clean.
• Customization Available: We support customization of filter paper quality, metal thickness and packaging for your market.
• Fast Delivery: In-stock items usually ship in 5 to 10 days. Made-to-order items take 15 to 45 days, depending on quantity.

If your cooling system needs a coolant filter with additive, see our WF2071 coolant filter. If you are comparing suppliers, read our guide on how to choose an OEM truck filter factory.

Application Notes

Before ordering the WF2122 coolant filter, check these points:

1. Compare the number on your existing filter with the cross reference table above.
2. Confirm the thread is 11/16-16 UN-2B and matches your filter head.
3. Check whether your system needs a filter with or without chemical additive, and match the old filter.
4. Measure the height and outside diameter of the old filter, since a longer version also exists.

If you are not sure about fit, send us the OE number or a photo of the old filter, and we will help you confirm.

Installation and Maintenance Notes

1. Switch off the engine and let the cooling system cool down fully. Never open a hot cooling system.
2. If the filter head has a shutoff valve, close it before removing the old filter.
3. Place a drain pan under the filter, and remove the old filter with a filter wrench.
4. Check that the old gasket came off with the filter. A leftover gasket can cause leaks.
5. Clean the mounting surface, and lightly oil the gasket of the new WF2122 coolant filter.
6. Spin the new filter on by hand until the gasket touches, then tighten as specified by the engine manufacturer.
7. Open the shutoff valve, top up the coolant, start the engine, and check for leaks.
8. Replace the filter at the interval recommended by the engine maker.

FAQ

Q: Which part numbers does the WF2122 coolant filter replace?
A: It is a cross reference to Fleetguard WF2122, Cummins 3098689 and XWF4246, Baldwin B5088, Donaldson P550638, WIX 24083, NAPA 4083 and others listed above. Confirm fit before bulk orders.

Q: What thread does the WF2122 coolant filter use?
A: It uses an 11/16-16 UN-2B thread. Make sure your filter head matches before ordering.

Q: Does the WF2122 contain a chemical additive?
A: The original WF2122 is a non-chemical type without additive. Always match the additive type of your old filter and your coolant specification.

Q: Is the WF2122 the same as the WF2071?
A: No. Both use the same thread and are similar in size, but the WF2071 contains a coolant additive while the WF2122 does not. A longer version (WF2123) also exists, so check the OE number and height of your old filter.

Q: Can I order with custom packaging or private label?
A: We support customized packaging, filter paper quality and metal thickness. Contact our sales team with your requirements.

Q: What are the MOQ and lead time?
A: In-stock goods generally ship in 5 to 10 days, and made-to-order items take 15 to 45 days. Get in touch with us for MOQ on the WF2122 coolant filter.

Need the WF2122 coolant filter or other heavy-duty coolant filters? Send us the OE number, and we will reply with specifications and a quotation.
Email: sales@ixinfilters.com | WhatsApp: +86 18833443345 | Get a quote