LP2017 Oil Filter Element, 180 mm Height, 83 mm OD, Fits Ford 6.0L and 6.4L Turbo Diesel (2003-2010), Replaces Luber-Finer LP2017, Ford 3C3Z-6731-AA

Description

The LP2017 oil filter is a cartridge-type engine oil filter element, 180 mm tall with an 83 mm outside diameter, used on Ford 6.0L and 6.4L turbo diesel engines from 2003 to 2010 to remove dirt, metal particles and soot from engine oil. IXIN Filter manufactures this LP2017 oil filter as a factory-direct replacement for the Luber-Finer LP2017 and Ford 3C3Z-6731-AA, giving distributors, retailers and repair shops a dependable option for routine oil change service.

IXIN has produced filters since 2010 and supplies customers in more than 60 countries. Browse our full range of oil filters for cars, light trucks, heavy duty trucks, buses, construction and agricultural machinery.

LP2017 Oil Filter Specifications

Please confirm dimensions against your sample or drawing before ordering in bulk.

Compatible Applications

A public catalog listing for the Luber-Finer LP2017 and fleet parts catalogs list the LP2017 oil filter for:

• Ford 6.0L and 6.4L turbo diesel engines (2003 to 2010), Ford OE number 3C3Z-6731-AA
• Ford E-350 Super Duty (2004 to 2010)
• Ford E-450 Super Duty (2004 to 2010)
• Ford E-350 Club Wagon (2004 to 2005)

Fit can vary by engine, model year and oil filter housing. Please confirm your vehicle, engine and the OE number of your existing filter before ordering the LP2017 oil filter. If you only have a photo or the old filter, send it to us and we will help check the match.

LP2017 Oil Filter Cross Reference / Replacement Numbers

The LP2017 oil filter is a cross reference to the following part numbers:

OE and aftermarket part numbers are listed for reference only. All brand names belong to their respective owners, and IXIN is not affiliated with them. For official Luber-Finer numbers, you can also use Luber-finer’s online parts lookup and compare the result with our LP2017 oil filter data.

Why Oil Filter Replacement Matters

Engine oil constantly picks up metal particles, soot and sludge. An oil filter removes these contaminants while the oil circulates, protecting bearings, pistons and other moving parts from abrasive wear. A clogged or poor-quality oil filter lets dirt through, which shortens engine life and can lead to costly repairs, especially on diesel engines that generate a lot of soot. Replacing the LP2017 oil filter with every oil change, at the interval the engine maker recommends, keeps the oil clean and the engine protected.

Why Choose IXIN’s LP2017 Oil Filter

• Factory-Direct Supply: IXIN manufactures filters in its own factory in Linxi County, Hebei. You deal with the manufacturer, not a trading company.
• Wide Cross-Brand Coverage: One LP2017 oil filter replaces Luber-Finer, Ford, Fleetguard, ACDelco and Hastings references, which helps distributors simplify inventory.
• Defined Size for Easy Matching: A clear 180 mm height and 83 mm outside diameter make it simple to compare the LP2017 oil filter against the element you are replacing.
• Quality Filter Paper: We build our filters with media from a dedicated filter paper manufacturer. Read how high-quality filter paper improves truck air, oil and fuel filter performance.
• Customization Available: We support customization of filter paper quality, metal thickness and packaging for your market.
• Fast Delivery: In-stock items usually ship in 5 to 10 days. Made-to-order items take 15 to 45 days, depending on quantity.

To avoid cross-reference mistakes, read our filter cross reference guide before placing a bulk order for the LP2017 oil filter.

Installation and Maintenance Notes

1. Switch off the engine and let it cool. Place a drain pan under the engine.
2. Drain the oil as described in the engine manual, then open the oil filter housing and remove the old element.
3. Check that the old seals came out with the element. A leftover seal can cause leaks.
4. Clean the housing and sealing surfaces, and lightly oil the seals of the new LP2017 oil filter.
5. Fit the new element and close the housing, tightening as specified by the engine manufacturer.
6. Refill with the correct oil to the right level, start the engine and check for leaks.
7. Replace the filter with every oil change, at the interval recommended by the engine maker.

FAQ

Q: Which part numbers does the LP2017 oil filter replace?
A: It is a cross reference to Luber-Finer LP2017, Ford 3C3Z-6731-AA, Fleetguard LF16166 and LF16423, ACDelco PF1704, Hastings LF558 and others listed above. Confirm fit before bulk orders.

Q: What are the dimensions of the LP2017 oil filter?
A: It is 180 mm tall with an 83 mm outside diameter, a 35 mm bottom inside diameter and a 9 mm top inside diameter.

Q: Which vehicles does the LP2017 oil filter fit?
A: Catalogs list Ford 6.0L and 6.4L turbo diesel engines (2003 to 2010) and the Ford E-350 and E-450 Super Duty. Fit varies by engine and model year, so send us your OE number, vehicle details or a photo of the old filter, and we will help confirm.

Q: Is the LP2017 a spin-on filter?
A: No. Catalogs list it as a cartridge oil filter element, so it fits an oil filter housing and is sold as the element only. Check your housing type before ordering.

Q: Does the LP2017 oil filter have an anti-drain back valve?
A: Catalog data lists no anti-drain back valve for the LP2017.

Q: Can I order the LP2017 oil filter with custom packaging or private label?
A: We support customized packaging, filter paper quality and metal thickness. Contact our sales team with your requirements.

Q: What are the MOQ and lead time?
A: In-stock goods generally ship in 5 to 10 days, and made-to-order items take 15 to 45 days. Get in touch with us for MOQ on the LP2017 oil filter.

Need the LP2017 oil filter or other cartridge oil filters? Send us the OE number, and we will reply with specifications and a quotation.
Email: sales@ixinfilters.com | WhatsApp: +86 18833443345 | Get a quote